• 0


Hydraulic double scissor lift with double platform extension


Item No:JLB035.0021200D-5001
NB JL 3500XT 035jl00092 p2 NB b eing
NB JL 3500XT 035jl00092 p NB b
NB JL 3500XT 035jl00092 s NB b
NB JL 3500XT 035jl00092 f NB b
Customize Compare
Brief description
Item No: JLB035.0021200D-5001
Lifting capacity: 3500 kg
Type Doublescissor lift
Color Blue


The hydraulic double scissor lift JUMBO LIFT 3500 HF X-Tend with a load capacity of 3500 kg is the perfect all-round lifting platform for the automotive workshop where speed, flexibility and reliability are in demand. With its small space requirement, its high lifting height of 2005 mm, and its two times adjustable platforms and flat design, it is the lift that no professional garage should be without. Whether for tire changes, oil changes, working on the engine, check-in inspection, for low-lying sports cars, SUVs or vehicles such as the new long BMW 7 Series, the JUMBO LIFT 3500 HF X-Tend is ready to lift and lifted at lightning speed. The lifting platforms can be extended twice: In addition to the foldable extensions available with the "classic" Jumbo Lift NT and the flexible installation width, the new Jumbo Lift HF X-Tend has extendable extensions. The length of the mounting platforms can be adjusted from [AttributeShortCode,attribute=Aufnahmelänge min,attributeid=47] mm. The ramps can be locked and unlocked as usual in one simple movement. The JUMBO LIFT 3500 HF X-Tend is developed and manufactured by Nussbaum at its main plant in Kehl-Bodersweier in Baden-Württemberg.

  • Lifting time and lowering time: 35 seconds
  • Capacity: 3500 kg
  • Effective lifting height from 2005 mm
  • Extremely flat construction: Drive-on height of only 103 mm
  • Twice length-adjustable platform- Variable length of [AttributeShortCode,attribute=Aufnahmelänge min,attributeid=47] mm
  • Flexible mounting: Adjustable width, no compressed air access required
  • 360° access
  • Can also be installed flush with the floor: Jumbo Lift 3500 HF X-tend inground
  • Three times guaranteed quality: Power unit, hydraulic cylinder and the complete lifting platform are tested before dispatch.
  • Developed and manufactured in Germany
  • Recommended by BMW (for similar lifts Jumbo Lift 3200 NT, Jumbo Lift 4000 NT)

All hydraulic Jumbo lifts are equipped with two redundant hydraulic circuits as standard: Nussbaum's patented NT hydraulic technology is complemented by HyperFlow® technology, introduced in 2016 and unique worldwide. HyperFlow® automatically balances the pressure of the hydraulic circuits at each full stroke. There is no need for manual compensation or maintenance.

With the "Nussbaum Commander" we are the only manufacturer of lifting platforms in the world that can offer you a precise, variable lowering speed. The Nussbaum Commander enables sensitive lowering and allows the user to change and correct positions in no time at all, all with maximum safety. The JUMBO LIFT 3500 HF X-Tend is not only safe, but also exceptionally flexible and can be installed in different installation widths as required. You want to JUMBO LIFT 3500 HF X-Tend install flush with the floor? Click here to go to the inground version: Jumbo Lift 3500 HF X-tend inground

TheJUMBO LIFT 3500 HF X-Tend requires no compressed air at all. The four hydraulic cylinders require very little energy. The low power consumption, the continuous automatic compensation of the hydraulic circuits by the HyperFlow® system and the low maintenance requirements, also thanks to the reduced number of moving parts, reduce running costs. The operating lever "Nussbaum Commander" is attached to the power unit integrated in a metal housing. The control unit is connected to the lift only by the hydraulic hoses and can be positioned freely around the lift. The hydraulic hoses can be mounted on the workshop floor or in a protective metal housing on the floor as required. The double scissors are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently azul powder-coated. Your lifting platform is protected against dirt and weather for a long time.

Capacity 3500 kg
Installation type above ground
RAL color RAL 5001 - Blue
Coating Powder coating
Platform length min 1550 - 2320 mm
Recommended installation width 2020 mm
CE-Stop 1
Lifting height max. 2005 mm
Synchronization system
Platform width 610 mm
Platform height 103 mm
Platform distence min 800 - 900 mm
Drive on height 103 mm
Installation width min. 2020 - 2120 mm
Total width min 2020 - 2120 mm
Lifting/lowering time 35 sec
Total platform width 2020 mm
Oil quantity (approx.) 14 liter
Electrical connection (Ph/V/Hz) 3 Ph , 400 V , 50 Hz
Engine power 3 KW
Fuse protection
Foundation length 2100 mm
Foundation width 2060 mm
Concrete thickness 160 mm
Concrete quality C20/25
Noise level (<=) 70 db
Customs tariff number 84254100

Product Dimensions 1750mm x 770mm x 770mm
Total weight 950kg
Stackable 2 times
Bead breaking plate BL. 5x180x150 C60 Item No: 030JL66013
Cable plug KA132000B9 black Item No: 118620
Check valve RVE06 S 2 bar Installation: G1/4 Item No: 983700
Circuit breaker A 105/3.0200-EV-SO Item No: 990403
Command cylinder overflow cpl. Item No: 9040JL02600
Contactor DC24V / 5,7KW / 400V [27] Item No: 990842
Cylinder bolt bottom Rd. 28x197 (Kanban) Item No: 030JL62021
External bolt scissors Rd. 30x85 42CrMo4V verg. Item No: 030JL26165
Flat plug type M 6,3-2,5mm bare (BM 638 latching lug) Item No: 990328
Flat plug-in housing 6-fold for mounting Item No: 990327
Flat plug-in housing 6-fold for mounting Item No: 990330
Flat receptacles type F 6.3mm bare (B 638F) Item No: 990329
Follow cylinder overflow cpl. Item No: 9040JL02700
gear pump 1BK7S4,2 Q 2,7 cm³ Item No: 980340
Grease nipple (9AM6X1) Steel DIN 71412 M 6x1 Item No: 970020
Locating bearing bolt rail Rd. 20x60 42CrMo4V Item No: 9030JL68019
Locating bearing pin SK. SW22x63 9SMn28K ( galvanized ) Item No: 030JL05012
Locking Welded part Item No: 030JL66093
Mounting adapter (VPE 50) / M22-A Item No: 990965
Normally closed contact, front / M22-K01 Item No: 990181
Normally open contact, front / M22-K10 Item No: 990133
Nozzle 15-010/L 10 RB A3C Item No: 980014
Push button 1115.0101 Item No: 990322
Rubber apron 5X160X225 Item No: 9030JL62076
Sleeve Rd. 32x29 C45+C ( galvanized ) Item No: 030JL06030
Sliding block axle Rd. 20X570 C45+C ( galvanized ) Item No: 030JL06112
Sliding block top Fl. 70x48x20 Murtfeld green Item No: 9030JL26168
Submersible motor UO7K2-371 3,00 kW 3 Ph. 230/400V 50Hz 2pol. Item No: 992658
Type plate 53x53 ALU 0,5 mm ELOXALSCHILD Item No: 970513
Universal control for universal aggr. Sprinter 400V 3Phases Item No: 000STA03000TG
Galvanised cable duct for inground installation Item No: 030JL05515
Galvanised lost formwork for inground installation Item No: 030JL45501
Polymer pads 100 x 150 x 340 mm, 1 piece. Item No: 973852
Polymer pads 50 x 150 x 340 mm, 1 piece. Item No: 975041
trunking cover inground installation Item No: 032JL05517

Subscribe to our mailing list

* indicates required

NUSSBAUM GROUP verwendet die Informationen, die Sie in diesem Formular angeben, um mit Ihnen in Kontakt zu bleiben und um Produktupdates und auf Sie abgestimmtes Marketing bereitzustellen. Bitte lassen Sie uns wissen, was Sie von uns hören möchten:

Sie können Ihre Meinung jederzeit ändern, indem Sie in der Fußzeile einer E-Mail, die Sie von uns erhalten, auf den Link zum Abbestellen klicken oder uns unter [email protected] kontaktieren. Wir werden Ihre Informationen mit Respekt behandeln. Weitere Informationen zu unseren Datenschutzpraktiken finden Sie auf unserer Website. Indem Sie unten auf "Für Liste anmelden" klicken, stimmen Sie zu, dass wir Ihre Informationen in Übereinstimmung mit diesen Bedingungen verarbeiten dürfen.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.

© Otto Nußbaum GmbH & Co. KG - Alle Rechte vorbehalten.