Hydraulic 2-post lift with telescopic arms
The hydraulic 2-post lift POWER LIFT HF 4600 HSV with a load capacity of 4600 kg kg and asymmetric [semicolon]telescopic arms is the ideal lift for the quality and price-conscious automotive workshop. The perfect combination of premium hydraulics and mechanical safety, equipped with Nussbaum's patented HyperFlow® technology and a mechanical safety latch, the POWER LIFT HF 4600 HSV guarantees you perfect synchronisation at all times. With the extendable support arms consisting of a long single telescopic arm and a short double telescopic support arm you can lift a wide range of vehicles.
The POWER LIFT HF 4600 HSV is developed and produced by Nussbaum in Kehl-Bodersweier in Baden-Württemberg .
The HF series is the result of over 40 years of experience in the manufacture and development of high-quality automotive lifts Made in Germany. Mit unseren specially developed, in-house technologies, we can provide you with an always perfect synchronisation without manual maintenance effort . The ergonomic operating lever Nussbaum-Commander enables sensitive, stepless lowering and allows the user to change and correct positions in the twinkling of an eye, all with maximum safety.
How does the Nussbaum safety catch differ from conventional safety systems?
During the lifting process, the Nussbaum safety latch automatically secures the vehicle at intervals of 100 mm up to the maximum lifting height of [Hubhöhe] mm. The safety switch attached to the control column allows the lift to be additionally placed manually in the latch. In contrast to conventional 2-post lifts, the safety latch does not make any clicking noise during lifting and lowering, which is typical for this type of lifts. The vehicle can be lowered immediately after release of the latch, without first having to be lifted upwards out of the latch.
The pulling hydraulic cylinders protect the hydraulic circuit even during intensive use and require very little energy. The low power consumption, the consistent automatic compensation of the hydraulic circuits by the HyperFlow® system and low maintenance costs, also thanks to the reduced number of moving parts, reduce running costs. The POWER LIFT HF 4600 HSV uses only fixed pipes for all hydraulic connections. The POWER LIFT HF 4600 HSV are designed to be maintenance free throughout the life of the lift.
The oil submerged unit integrated in a sound-absorbing metal housing is mounted on the operating column and easily accessible for maintenance work. The columns and support arms are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently [Farbe name] powder-coated. Your lift is thus protected against dirt and weather in the long term. The design and the processing of the POWER LIFT HF 4600 HSV give it an elegant overall appearance, which also allows your workshop to appear in the best light in direct customer contact.
Hebebühne mit asymmetrischen teleskopierbaren Tragarmen, 4 im Tragarm fixierte Drehteller, Steuerung mittels Commanderhebel. Passive Sicherheitsklinke, bei Bedarf kann manuell über Drucktaster in Klinke abgesetzt werden.
Fundamentstärke 250 mm C20/25 normale Bewehrung, 16 Dübel BM16-25/100/40 (abhängig vom Fundament, siehe Prüfbuch), Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Hydrauliköl HLP 32 ca. 10l, Entladung
|RAL color||RAL 5001 - Blue|
|Recommended installation width||3250 mm|
|Required ceiling height||4180 mm|
|Pick up pad height min||115 mm|
|Pick up pad height max||190 mm|
|Pick up pad height min||115 - 190 mm|
|Min length front arm||570 - 1160 mm|
|Min length rear arm||1130 - 1840 mm|
|Lifting height max.||2050 mm|
|Clear distance between columns min||2750 mm|
|Column height||4030 mm|
|Installation width min.||3250 mm|
|Total width min||3250 mm|
|Lifting time||35 sec|
|Lowering time||24 sec|
|Clearance height min||3975 - 4575 mm|
|Drive-through width min||2495 mm|
|Drive-through width column min||2750 mm|
|Drive-through width lifting carriage min||2495 mm|
|Total height min||4030 - 4630 mm|
|Pick up device|
|Oil quantity (approx.)||10 liter|
|Electrical connection (Ph/V/Hz)||3 Ph , 400 V , 50 Hz|
|Engine power||3 KW|
|Foundation length||1700 mm|
|Foundation width||3650 mm|
|Concrete thickness||250 mm|
|Noise level (<=)||70 db|
|Customs tariff number||84254100|
|Product Dimensions||5100mm x 1100mm x 800mm|