UNI LIFT 6500

The hydraulic scissor lifts UNI LIFT 6500 AMS with a capacity of 6500 kg is the best scissor lifts for passenger cars, SUVs and vans. The wide range of work that can be done with the UNI LIFT 6500 AMS ranges from wheel alignment and acceptance to underbody repairs and maintenance. Equipped with a wheel alignment kit, the UNI LIFT 6500 AMS can literally be used anytime, anywhere. The UNI LIFT 6500 AMS raises to a comfortable maximum height of 1927 mm and is flexible in its installation width. The wheel alignment set integrated in the platforms of the lift for precise wheel alignment consists of sliding plates fitted in the rear of the platforms and recesses for turntables in the front area. The mechanical safety lock attached to the scissors guarantees perfect stability during wheel alignment.

The UNI LIFT 6500 AMS can easily be retrofitted with the axle jacks JAX 2600, JAX 3200 or JAX 4000 and thus adapts to the development of your workshop for a long time.

• Lifting time: 50 Seconds
• Lowering time: 40 Seconds
• Capacity: 6500 kg
• Lifting height of 1927 mm
• Integrated wheel alignment set with sliding plates and recesses for turntable
• Mechanical safety lock guarantees perfect stability during wheel alignment
• Platforms up to 6000 mm length
• Flexible installation width
• Can be retrofitted with axle jacks
• 360° access
• Can also be installed flush with the floor: UNI LIFT
• Developed and manufactured in Germany
• Low-noise oil submerged motor

The UNI LIFT 6500 AMS is equipped with a hydraulic synchronization control and a mechanical safety lock. The control unit of the UNI LIFT 6500 AMS is equipped with a main switch and protected pushbuttons and can be positioned at various distances from the lift. The UNI LIFT 6500 AMS has no fixed connections between the rails and can therefore be installed in different installation widths as required.

The low power consumption and the low maintenance effort, also thanks to the reduced number of moving parts, reduce the running costs. The scissors and rails are welded in Nussbaum's own state-of-the-art welding machines, shot peened and then grau powder coated. Your lifting platform is thus protected against dirt and weather in the long term.

Installation requirements

Fundament gemäß gültigem Datenblatt, 12 Dübel (abhängig vom Fundament, siehe Prüfbuch), Hydrauliköl HLP ISO 32, Füllmenge ca. 17 Liter, Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Luftanschluss 6-10 bar, Entladung