Hydraulic 2-post lift with triple safety system and double telescopic arms
The hydraulic 2-post lift Power Lift HF 3S 3000 DT with a load capacity of 3000 kg and asymmetrical double telescopic lifting arms is the world's only lift with triple safety system. The Power Lift HF 3S 3000 DT is the ideal lift for daily continuous use in a constantly busy auto repair shop, for The only the best is good enough. With their fast lifting and lowering times, with its two redundant hydraulic systems and the automatic safety latch, it is the perfect blend of maximum safety and performance.
The Power Lift HF 3S 3000 DT is equipped as standard with the patented Nussbaum NT and HyperFlow® technologies ausgestattet and is developed and produced by Nussbaum in Kehl-Bodersweier in Baden-Württemberg .
The HF 3S series is the result of over 40 years of experience in the manufacture and development of high-quality automotive lifting platforms Made in Germany. With specially developed, in-house technologies, we are the only lift manufacturer in the world that can provide you with a precise, variable lowering speed and an always perfect synchronisation without manual maintenance effort anbieten. The ergonomic, stepless operating lever Nussbaum-Commander enables sensitive lowering and allows the user to change and correct positions in the twinkling of an eye, all with maximum safety.
The Power Lift HF 3S 3000 DT is not only safe, but also exceptionally flexible and can be adapted to a wide range of workshop sizes and configurations.Their base frame-free design, adjustable in width and height, enables a wide range of installation combinations and variants: With a minimum height of [AttributeShortCode,attribute=Erforderliche Deckenhöhe,attributeid=77] mm thanks to the optional riser pipe extensions the Power Lift HF 3S 3000 DT can be used both in workshops with low ceiling heights and to lift the underbody of high vehicles such as vans and vans to the ideal working height for you.
The pulling hydraulic cylinders protect the hydraulic circuit even during intensive use and require very little energy. The low power consumption, the consistent automatic compensation of the hydraulic circuits by the HyperFlow® system and low maintenance costs, also thanks to the reduced number of moving parts, reduce running costs. The pump unit integrated in a sound-absorbing metal housing is mounted on the control column and easily accessible for maintenance work. A compressed air connection and a 220 V socket are integrated in the slave column. The arms and columns are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently grau powder-coated. Your lift is thus protected against dirt and weather in the long term.
The design and processing of the Power Lift HF 3S 3000 DTgives it an elegant overall appearance, which also allows your workshop to appear in the best light in direct customer contact.
How does the Nussbaum safety catch differ from conventional safety systems?
During the lifting process, the Nussbaum safety latch automatically secures the vehicle at intervals of 100 mm up to the maximum lifting height of 1995mm. The safety switch attached to the control column allows the lift to be additionally placed manually in the latch. In contrast to conventional 2-post lifts, the safety latch does not make any clicking noise during lifting and lowering, which is typical for this type of lifts. The vehicle can be lowered immediately after release of the latch, without first having to be lifted upwards out of the latch.
Hebebühne mit asymmetrischen, teleskopierbaren Tragarmen, vier im Tragarm fixierte Drehteller, Energie-Set: E-Set (230 V/ Druckluft) in der Bediensäule integriert
Fundamentstärke 200mm C20/25 normale Bewehrung, 16 Dübel BM12-20/80/40 (abhängig vom Fundament, siehe Prüfbuch), Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Luftanschluss für Energie-Set, Hydrauliköl HLP32 ca. 10l, Entladung
|RAL color||RAL 7016 - Grey|
|Pick up pad height min||95 - 140 mm|
|Pick up pad height min||95 - 140 mm|
|Min length front arm||470 - 870 mm|
|Min length rear arm||940 - 1495 mm|
|Lifting time||20 sec|
|Lowering time||14 sec|
|Lifting height||1995 mm|
|Required ceiling height||4200 mm|
|Total height min||4040 mm|
|Column height||4040 mm|
|Clearance height min||4040 - 4909 mm|
|Total width min||3000 - 3300 mm|
|Recommended installation width||3100 mm|
|Installation width min.||3000 - 3300 mm|
|Drive-through width min||2560 - 2760 mm|
|Drive-through width column min||2560 - 2760 mm|
|Drive-through width lifting carriage min||2301 - 2501 mm|
|Clear distance between columns min||2560 - 2760 mm|
|Pick up device|
|Oil quantity (approx.)||13 liter|
|Electrical connection (Ph/V/Hz)||3 Ph , 400 V , 50 Hz|
|Engine power||3 KW|
|Noise level (<=)||70 db|
|Foundation length||1600 mm|
|Foundation width||3500 mm|
|Concrete thickness||200 mm|
|Customs tariff number||84254100|
|Data sheet||223 KB|
|Foundation plan||48 KB|
|Cube foundation plan||55 KB|
|Pickup point matrix||467 KB|
|Pickup point matrix||328 KB|
|OPI POWER LIFT HF3S 2xx NT K V10 DE EN FR ES IT||29 MB|
|Power Lift HF 3S Prospetto - Italiano||2.5 MB|
|Power Lift HF 3S Broschüre - Deutsch||2.5 MB|
|Power Lift HF 3S Brochure - English||2.5 MB|
|Power Lift HF 3S Panfleto - Español||2.5 MB|
|Power Lift HF 3S Brochure - Français||2.5 MB|
|Product Dimensions||4120mm x 800mm x 600mm|