• 0

Power Lift HF 3S 3000 DT

Hydraulic 2-post lift with triple safety system and double telescopic arms, CE-Stop

Power Lift HF 3S 3000 DT

Item No:HLNTK230.0000124D-7016
Power Lift HF 3S 3000 DT
NB HF 3S 3000 DT f NB g
NB HF 3S 3000 DT s NB g CE
Customize Compare
Brief description
Item No: HLNTK230.0000124D-7016
Lifting capacity: 3000 kg
Type 2 post lifts
Color Grey
Händler in Ihrer Nähe 20 Nicht Ihre Postleitzahl? hier eingeben

Nussbaum Automotive Lifts, Inc.

177 Defense Highway Suite 7, Annapolis
Maryland 21401

https://

Power Lift HF 3S 3000 DT

The hydraulic 2-post lift Power Lift HF 3S 3000 DT with a load capacity of 3000 kg and asymmetrical double telescopic lifting arms is the world's only lift with triple safety system. The Power Lift HF 3S 3000 DT is the ideal lift for daily continuous use in a constantly busy auto repair shop, for The only the best is good enough. With their fast lifting and lowering times, with its two redundant hydraulic systems and the automatic safety latch, it is the perfect blend of maximum safety and performance.

The Power Lift HF 3S 3000 DT is equipped as standard with the patented Nussbaum NT and HyperFlow® technologies ausgestattet and is developed and produced by Nussbaum in Kehl-Bodersweier in Baden-Württemberg .

  • Lifting time: 20 seconds / Lowering time [AttributeShortCode,attribute=Lowering time,attributeid=62] seconds
  • Load capacity: 3000 kg
  • Triple safety: Two redundant hydraulic circuits plus Automatic safety latch (no clacking during lifting and lowering)
  • Adjustable in width and height (with optional column extension)
  • Compressed air connection and 220 V socket integrated in column
  • High quality: Every power unit and every hydraulic cylinder is tested before shipment
  • Developed and manufactured in Germany
  • CE-Stop

The HF 3S series is the result of over 40 years of experience in the manufacture and development of high-quality automotive lifting platforms Made in Germany. With specially developed, in-house technologies, we are the only lift manufacturer in the world that can provide you with a precise, variable lowering speed and an always perfect synchronisation without manual maintenance effort anbieten. The ergonomic, stepless operating lever Nussbaum-Commander enables sensitive lowering and allows the user to change and correct positions in the twinkling of an eye, all with maximum safety.

The Power Lift HF 3S 3000 DT is not only safe, but also exceptionally flexible and can be adapted to a wide range of workshop sizes and configurations.Their base frame-free design, adjustable in width and height, enables a wide range of installation combinations and variants:  With a minimum height of [AttributeShortCode,attribute=Erforderliche Deckenhöhe,attributeid=77] mm thanks to the optional riser pipe extensions the Power Lift HF 3S 3000 DT can be used both in workshops with low ceiling heights and to lift the underbody of high vehicles such as vans and vans to the ideal working height for you.

The pulling hydraulic cylinders protect the hydraulic circuit even during intensive use and require very little energy. The low power consumption, the consistent automatic compensation of the hydraulic circuits by the HyperFlow® system and low maintenance costs, also thanks to the reduced number of moving parts, reduce running costs. The pump unit integrated in a sound-absorbing metal housing is mounted on the control column and easily accessible for maintenance work. A compressed air connection and a 220 V socket are integrated in the slave column. The arms and columns are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently grau powder-coated. Your lift is thus protected against dirt and weather in the long term.

The design and processing of the Power Lift HF 3S 3000 DTgives it an elegant overall appearance, which also allows your workshop to appear in the best light in direct customer contact.

How does the Nussbaum safety catch differ from conventional safety systems?

During the lifting process, the Nussbaum safety latch automatically secures the vehicle at intervals of 100 mm up to the maximum lifting height of 1995mm. The safety switch attached to the control column allows the lift to be additionally placed manually in the latch. In contrast to conventional 2-post lifts, the safety latch does not make any clicking noise during lifting and lowering, which is typical for this type of lifts. The vehicle can be lowered immediately after release of the latch, without first having to be lifted upwards out of the latch.

Scope of delivery

Lift with asymmetrical, telescopic arms, four turntables fixed in the arm, energy set: E-Set (230 V/ compressed air) integrated in the operating column

Installation requirements

Foundation 200mm C20/25 standard reinforcement, 16 dowels BM12-20/80/40 (depending on foundation, see manual), eletric connection 3 PH, N + PE, 400 V, 50 Hz, 16 Amp. slow fuse, Compressed air connection for energy set, Hydraulic Oil HLP32 ca. 10l, Unloading

Details
Capacity 3000 kg
RAL color RAL 7016 - Grey
Coating Powder coating
Pick up pad height min 95 - 140 mm
Pick up pad height min 95 - 140 mm
Min length front arm 470 - 870 mm
Min length rear arm 940 - 1495 mm
Lifting time 20 sec
Lowering time 14 sec
Lifting height 1995 mm
Required ceiling height 4200 mm
Total height min 4040 mm
Column height 4040 mm
Clearance height min 4040 - 4909 mm
Total width min 3000 - 3300 mm
Recommended installation width 3100 mm
Installation width min. 3000 - 3300 mm
Drive-through width min 2560 - 2760 mm
Drive-through width column min 2560 - 2760 mm
Drive-through width lifting carriage min 2301 - 2501 mm
Clear distance between columns min 2560 - 2760 mm
Pick up device
Synchronization system
E-Set
Oil quantity (approx.) 13 liter
Electrical connection (Ph/V/Hz) 3 Ph , 400 V , 50 Hz
Fuse protection
Engine power 3 KW
Noise level (<=) 70 db
Foundation length 1600 mm
Foundation width 3500 mm
Concrete thickness 200 mm
Concrete quality C20/25
Customs tariff number 84254100

Datasheets

Data sheet 223 KB

Foundation plans

Foundation plan 48 KB
Cube foundation plan 55 KB

Liftingpatterns

Pickup point matrix 467 KB
Pickup point matrix 328 KB

Inspection books

OPI POWER LIFT HF3S 2xx NT K V10 DE EN FR ES IT 17 MB

Leaflets

Power Lift HF3S Brochure - English 2.1 MB
Power Lift HF3S Panfleto - Español 2.1 MB
Power Lift HF3S Brochure - Français 2.1 MB
Power Lift HF 3S Prospetto - Italiano 2.1 MB
Power Lift HF 3S Broschüre - Deutsch 2.1 MB
1
Packaging
Product Dimensions 4120mm x 800mm x 600mm
Total weight 700kg
Stackable 3 times
Listenansicht Explosionsansicht
Cover plate BL. 1,25x198x2760 DX 51 D+Z cpl. Item No: 240SL09008
low stock
Folgezylinder 1865 Hub / HLNT u. HF3S / HF neue Generation Item No: 230SLNT12830-ET
Delivery time on request
Klinkenhalter kpl. Bedienseite Item No: 240HLNTK25400
Delivery time on request
Klinkenhalter kpl. Gegenseite Item No: 240HLNTK25500
low stock
Kommandozylinder 1865 Hub / HLNT u. HF3S / HF neue Generation Item No: 230SLNT12820-ET
Delivery time on request
Schlauchsatz 230/240HLNT gebündelt, gereinigt+Enden verschl. Item No: 230HLNT01090.1
low stock
Steuerung m. Platine HLNTK 3 Ph. 3 x 400V (230V) Item No: 000STA03600-HLNTK
low stock
1
Power Lift HF 3S 3000 DT
Play
Customize

Sign up to receive the Nussbaum Newsletter

Subscribe to our mailing list

* indicates required

NUSSBAUM GROUP verwendet die Informationen, die Sie in diesem Formular angeben, um mit Ihnen in Kontakt zu bleiben und um Produktupdates und auf Sie abgestimmtes Marketing bereitzustellen. Bitte lassen Sie uns wissen, was Sie von uns hören möchten:

Sie können Ihre Meinung jederzeit ändern, indem Sie in der Fußzeile einer E-Mail, die Sie von uns erhalten, auf den Link zum Abbestellen klicken oder uns unter [email protected] kontaktieren. Wir werden Ihre Informationen mit Respekt behandeln. Weitere Informationen zu unseren Datenschutzpraktiken finden Sie auf unserer Website. Indem Sie unten auf "Für Liste anmelden" klicken, stimmen Sie zu, dass wir Ihre Informationen in Übereinstimmung mit diesen Bedingungen verarbeiten dürfen.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.

© Nussbaum Automotive Lifts GmbH - Alle Rechte vorbehalten.