• 0

Power Lift HF 3S 3500 DT

Hydraulic 2-post lift with triple safety system and double telescopic arms

Power Lift HF 3S 3500 DT

Item No:HLNTK235.0000120D-7016
Power Lift HF 3S 3500 DT
NB HF 3S 3500 DT f NB g
NB HF 3S 3500 DT s NB g
Customize Compare
Brief description
Item No: HLNTK235.0000120D-7016
Lifting capacity: 3500 kg
Type 2 post lift
Color Grey
Händler in Ihrer Nähe 20 Nicht Ihre Postleitzahl? hier eingeben

Nussbaum Automotive Lifts, Inc.

177 Defense Highway Suite 7, Annapolis
Maryland 21401

https://

Power Lift HF 3S 3500 DT

The hydraulic 2-post lift Power Lift HF 3S 3500 DT with a load capacity of 3500 kg and asymmetrical double telescopic lifting arms is the world's only lift with triple safety system. The Power Lift HF 3S 3500 DT is the ideal lift for daily continuous use in a consistently busy garage where only the best is good enough. With it's fast lifting- and lowering time, with its two redundant hydraulic systems and the automatic safety latch, it is the perfect blend of maximum safety and performance.

The Power Lift HF 3S 3500 DT is equipped as standard with the patented Nussbaum NT and HyperFlow® technologies and is developed and produced by Nussbaum in Kehl-Bodersweier in Baden-Württemberg .

  • Lifting time: 23 seconds / Lowering time [AttributeShortCode,attribute=Lowering time,attributeid=62] seconds
  • Load capacity: 3500 kg
  • Triple safety: Two redundant hydraulic circuits plus an automatic safety latch (no clacking during lifting and lowering)
  • Adjustable in width and height (with optional column extension)
  • Compressed air connection and 220 V socket integrated in column
  • High quality: Every power unit and every hydraulic cylinder is tested before shipment
  • Developed and manufactured in Germany

The HF 3S series is the result of over 40 years of experience in the manufacture and development of high-quality automotive lifting platforms Made in Germany. With specially developed, in-house technologies, we are the only lift manufacturer in the world that can provide you with a precise, variable lowering speed and an always perfect synchronisation without manual maintenance effort . The ergonomic, stepless operating lever Nussbaum-Commander enables sensitive lowering and allows the user to change and correct positions in the twinkling of an eye, all with maximum safety.

The Power Lift HF 3S 3500 DT is not only safe, but also exceptionally flexible and can be adapted to a wide range of workshop sizes and configurations.Their base frame-free design, adjustable in width and height, enables a wide range of installation combinations and variants:  Mit a minimum height of [AttributeShortCode,attribute=Erforderliche Deckenhöhe,attributeid=77] mm and thanks to the optional riser pipe extensions the Power Lift HF 3S 3500 DT can be used both in workshops with low ceiling heights and to lift the underbody of high vehicles such as vans and vans to the ideal working height for you.

The pulling hydraulic cylinders protect the hydraulic circuit even during intensive use and require very little energy. The low power consumption, the consistent automatic compensation of the hydraulic circuits by the HyperFlow® system and low maintenance costs, also thanks to the reduced number of moving parts, reduce running costs. The pump unit integrated in a sound-absorbing metal housing is mounted on the control column and easily accessible for maintenance work. A compressed air connection and a 220 V socket are integrated in the slave column. The arms and columns are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently Grey powder-coated. Your lift is thus protected against dirt and weather in the long term.

The design and the processing of the Power Lift HF 3S 3500 DT give it an elegant overall appearance, which also allows your workshop to appear in the best light in direct customer contact.

How does the Nussbaum safety catch differ from conventional safety systems?

During the lifting process, the Nussbaum safety latch automatically secures the vehicle at intervals of 100 mm up to the maximum lifting height of 2005 mm. The safety switch attached to the control column allows the lift to be additionally placed manually in the latch. In contrast to conventional 2-post lifts, the safety latch does not make any clicking noise during lifting and lowering, which is typical for this type of lifts. The vehicle can be lowered immediately after release of the latch, without first having to be lifted upwards out of the latch.

Scope of delivery

Hebebühne mit asymmetrischen, teleskopierbaren Tragarmen, vier im Tragarm fixierte Drehteller, Energie-Set: E-Set (230 V/ Druckluft) in der Bediensäule integriert

Installation requirements

Fundamentstärke 200mm C20/25 normale Bewehrung, 16 Dübel BM12-20/80/40 (abhängig vom Fundament, siehe Prüfbuch), Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Luftanschluss für Energie-Set, Hydrauliköl HLP32 ca. 10l, Entladung

Details
Capacity 3500 kg
RAL color RAL 7016 - Grey
Coating Powder coating
Pick up pad height min 102 - 166 mm
Pick up pad height min 102 - 166 mm
Min length front arm 570 - 1160 mm
Min length rear arm 940 - 1495 mm
Lifting time 23 sec
Lowering time 14 sec
Lifting height 2005 mm
Required ceiling height 4200 mm
Total height min 4040 mm
Column height 4040 mm
Clearance height min 4040 - 4909 mm
Total width min 3130 - 3330 mm
Recommended installation width 3230 mm
Installation width min. 3130 - 3330 mm
Drive-through width min 2546 - 2746 mm
Drive-through width column min 2546 - 2746 mm
Drive-through width lifting carriage min 2300 - 2500 mm
Clear distance between columns min 2546 - 2746 mm
Pick up device
Synchronization system
E-Set
Oil quantity (approx.) 13 liter
Electrical connection (Ph/V/Hz) 3 Ph , 400 V , 50 Hz
Fuse protection
Engine power 3 KW
Noise level (<=) 70 db
Foundation length 1600 mm
Foundation width 3630 mm
Concrete thickness 200 mm
Concrete quality C20/25
Customs tariff number 84254100

Datasheets

Datenblatt v8 200 KB

Foundation plans

Foundation plan 48 KB
Cube foundation plan 55 KB

Liftingpatterns

Pickup point matrix 163 KB
Pickup point matrix 98 KB

Inspection books

OPI POWER LIFT HF3S 2xx NT K V10 DE EN FR ES IT 17 MB

Leaflets

Power Lift HF3S Brochure - English 2.1 MB
Power Lift HF3S Panfleto - Español 2.1 MB
Power Lift HF3S Brochure - Français 2.1 MB
Power Lift HF 3S Prospetto - Italiano 2.1 MB
Power Lift HF 3S Broschüre - Deutsch 2.1 MB
1
Packaging
Product Dimensions 4120mm x 800mm x 600mm
Total weight 700kg
Stackable 3 times
Fixing pin pad Item No: 245SPL08766
Pad extension 140 mm Item No: 245SPL08736
Pad extension 80 mm Item No: 245SPL08735
Pad extension set Item No: 245SPL08734
Prism-Pad Item No: 245SPL08750
Rectangular TESLA lifting pad Item No: 245SPL08790
Sill rebate plug-in mount for VW vehicles for support plate Item No: 245SPL08850
Stackable pad as a retrofit kit Item No: 245SPL08780
U-Pad Item No: 245SPL08740
Power Lift HF 3S 3500 DT
Play
Customize

Sign up to receive the Nussbaum Newsletter

Subscribe to our mailing list

* indicates required

NUSSBAUM GROUP verwendet die Informationen, die Sie in diesem Formular angeben, um mit Ihnen in Kontakt zu bleiben und um Produktupdates und auf Sie abgestimmtes Marketing bereitzustellen. Bitte lassen Sie uns wissen, was Sie von uns hören möchten:

Sie können Ihre Meinung jederzeit ändern, indem Sie in der Fußzeile einer E-Mail, die Sie von uns erhalten, auf den Link zum Abbestellen klicken oder uns unter [email protected] kontaktieren. Wir werden Ihre Informationen mit Respekt behandeln. Weitere Informationen zu unseren Datenschutzpraktiken finden Sie auf unserer Website. Indem Sie unten auf "Für Liste anmelden" klicken, stimmen Sie zu, dass wir Ihre Informationen in Übereinstimmung mit diesen Bedingungen verarbeiten dürfen.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.

© Nussbaum Automotive Lifts GmbH - Alle Rechte vorbehalten.