Hydraulic 2-post lift with triple safety system and Mini Max arms
The hydraulic 2-post lift Power Lift HF 3S 3500 MM with a load capacity of 3500 kg and asymmetrical Mini Max arms, the world's only lift with a triple safety system. The Power Lift HF 3S 3500 MM is the ideal lift for daily continuous use in a consistently busy garage where only the best is good enough. With their fast lifting and lowering times, with its two redundant hydraulic systems and the automatic safety latch, it is the perfect blend of maximum safety and performance.
The Mini Max support plates allow easy access to the pick-up points of lowered vehicles, vehicles with deep-drawn side skirts or off-road vehicles.. The support plates can be conveniently raised to the subfloor by foot after swivelling in.
The Power Lift HF 3S 3500 MM is equipped as standard with the patented Nussbaum NT and HyperFlow® technologies ausgestattet and is developed and produced by Nussbaum in Kehl-Bodersweier in Baden-Württemberg .
The HF 3S series is the result of over 40 years of experience in the manufacture and development of high-quality automotive lifting platforms Made in Germany. With specially developed, in-house technologies, we are the only lift manufacturer in the world that can provide you with a precise, variable lowering speed and an always perfect synchronisation without manual maintenance effort anbieten. The ergonomic, stepless operating lever Nussbaum-Commander enables sensitive lowering and allows the user to change and correct positions in the twinkling of an eye, all with maximum safety.
The Power Lift HF 3S 3500 MM is not only safe, but also exceptionally flexible and can be adapted to a wide range of workshop sizes and configurations.Their base frame-free design, adjustable in width and height, enables a wide range of installation combinations and variants: With a minimum height of [AttributeShortCode,attribute=Erforderliche Deckenhöhe,attributeid=77] mm and thanks to the optional riser pipe extensions the Power Lift HF 3S 3500 MM can be used both in workshops with low ceiling heights and to lift the underbody of high vehicles such as vans and vans to the ideal working height for you.
The pulling hydraulic cylinders protect the hydraulic circuit even during intensive use and require very little energy. The low power consumption, the consistent automatic compensation of the hydraulic circuits by the HyperFlow® system and low maintenance costs, also thanks to the reduced number of moving parts, reduce running costs. The pump unit integrated in a sound-absorbing metal housing is mounted on the control column and easily accessible for maintenance work. A compressed air connection and a 220 V socket are integrated in the slave column. The arms and columns are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently Grey powder-coated. Your lift is thus protected against dirt and weather in the long term.
The design and the processing of the Power Lift HF 3S 3500 MM give it an elegant overall appearance, which also allows your workshop to appear in the best light in direct customer contact.
How does the Nussbaum safety catch differ from conventional safety systems?
During the lifting process, the Nussbaum safety latch automatically secures the vehicle at intervals of 100 mm up to the maximum lifting height of 2045 mm. The safety switch attached to the control column allows the lift to be additionally placed manually in the latch. In contrast to conventional 2-post lifts, the safety latch does not make any clicking noise during lifting and lowering, which is typical for this type of lifts. The vehicle can be lowered immediately after release of the latch, without first having to be lifted upwards out of the latch.
Hebebühne mit asymmetrischen, teleskopierbaren Tragarmen, vier im Tragarm fixierte Drehteller, Energie-Set: E-Set (230 V/ Druckluft) in der Bediensäule integriert
Fundamentstärke 200mm C20/25 normale Bewehrung, 16 Dübel BM12-20/80/40 (abhängig vom Fundament, siehe Prüfbuch), Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Luftanschluss für Energie-Set, Hydrauliköl HLP32 ca. 10l, Entladung
|RAL color||RAL 7016 - Grey|
|Recommended installation width||3350 mm|
|Required ceiling height||4200 mm|
|Pick up pad height min||75 mm|
|Pick up pad height max||185 mm|
|Pick up pad height min||75 - 185 mm|
|Min length front arm||600 - 900 mm|
|Min length rear arm||1000 - 1480 mm|
|Clear distance between columns min||2566 - 2766 mm|
|Column height||4040 mm|
|Lifting height||2045 mm|
|Installation width min.||3150 - 3350 mm|
|Total width min||3150 - 3350 mm|
|Lifting time||23 sec|
|Lowering time||14 sec|
|Clearance height min||4040 - 4909 mm|
|Drive-through width min||2566 - 2766 mm|
|Drive-through width column min||2566 - 2766 mm|
|Drive-through width lifting carriage min||2323 - 2523 mm|
|Total height min||4040 mm|
|Pick up device|
|Oil quantity (approx.)||13 liter|
|Electrical connection (Ph/V/Hz)||3 Ph , 400 V , 50 Hz|
|Engine power||3 KW|
|Foundation length||1600 mm|
|Foundation width||3750 mm|
|Concrete thickness||200 mm|
|Noise level (<=)||70 db|
|Customs tariff number||84254100|
|Data sheet||246 KB|
|Foundation plan||48 KB|
|Cube foundation plan||55 KB|
|Pickup point matrix||101 KB|
|OPI POWER LIFT HF3S 2xx NT K V10 DE EN FR ES IT||26 MB|
|Power Lift HF 3S Prospetto - Italiano||2.5 MB|
|Power Lift HF 3S Broschüre - Deutsch||2.5 MB|
|Power Lift HF 3S Brochure - English||2.5 MB|
|Power Lift HF 3S Panfleto - Español||2.5 MB|
|Power Lift HF 3S Brochure - Français||2.5 MB|
|Product Dimensions||4120mm x 800mm x 600mm|