• 0

Power Lift HF 3000 DT

Hydraulic 2-post lift with telescopic arms

Power Lift HF 3000 DT

Item No:SLK230.0000120D-5001 Price: €3.599,00 Tax included
Power Lift HF 3000 DT
NB HF 3000 DT f NB b
NB HF 3000 DT s NB b
Online price
€3.599,00
Tax included
Add to Cart Customize Compare
Brief description
Item No: SLK230.0000120D-5001
Lifting capacity: 3000 kg
Type 2 post lift
Color Blue

Power Lift HF 3000 DT

The hydraulic 2-post lift Power Lift HF 3000 DT with a load capacity of 3000 kg and asymmetric telescopic arms is the ideal lift for the quality and price conscious dynamic auto repair shop. The perfect combination of premium hydraulics and mechanical safety, equipped with Nussbaum's patented HyperFlow® technology and a mechanical safety latch, the Power Lift HF 3000 DT guarantees you perfect synchronisation at all times. With the extendable support arms consisting of a long single telescopic arm and a short double telescopic support arm you can lift a wide range of vehicles.

The Power Lift HF 3000 DT is developed and produced by Nussbaum in Kehl-Bodersweier in Baden-Württemberg .

  • Lifting time: 31 seconds / Lowering time [AttributeShortCode,attribute=Lowering time,attributeid=62] seconds
  • Load capacity: 3000 kg
  • Less wear, less downtime for maintenance thanks to HyperFlow®
  • Automatic safety latch (no clacking during lifting and lowering)
  • Guaranteed quality: The hydraulic cylinders are individually tested before dispatch
  • Developed and manufactured in Germany

The HF series is the result of over 40 years of experience in the manufacture and development of high-quality automotive lifts Made in Germany. With unseren specially developed, in-house technologies, we can provide you with an always perfect synchronisation without manual maintenance effort .

How does the Nussbaum safety catch differ from conventional safety systems?

During the lifting process, the Nussbaum safety latch automatically secures the vehicle at intervals of 100 mm up to the maximum lifting height of [AttributeShortCode,attribute=Hubhöhe max.,attributeid=50] mm. The safety switch attached to the control column allows the lift to be additionally placed manually in the latch. In contrast to conventional 2-post lifts, the safety latch does not make any clicking noise during lifting and lowering, which is typical for this type of lifts. The vehicle can be lowered immediately after release of the latch, without first having to be lifted upwards out of the latch.

The pulling hydraulic cylinders protect the hydraulic circuit even during intensive use and require very little energy. The low power consumption, the consistent automatic compensation of the hydraulic circuits by the HyperFlow® system and low maintenance costs, also thanks to the reduced number of moving parts, reduce running costs. The columns and support arms are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently azul powder-coated. Your lift is thus protected against dirt and weather in the long term. The design and the processing of the Power Lift HF 3000 DT give it an elegant overall appearance, which also allows your workshop to appear in the best light in direct customer contact.

Shipment

Hebebühne mit asymmetrischen, teleskopierbaren Tragarmen, vier im Tragarm fixierte Drehteller, Energie-Set: E-Set (230 V/ Druckluft) in der Bediensäule integriert

Installation services

Fundamentstärke 200mm C20/25 normale Bewehrung, 16 Dübel BM12-20/80/40 (abhängig vom Fundament, siehe Prüfbuch), Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Luftanschluss für Energie-Set, Hydrauliköl HLP32 ca. 10l, Entladung

Details
Capacity 3000 kg
RAL color RAL 5001 - Blue
Coating Powder coating
Recommended installation width 3100 mm
Required ceiling height 4200 mm
Pick up pad height min 95 mm
Pick up pad height max 140 mm
Pick up pad height min 95 - 140 mm
Min length front arm 470 - 870 mm
Min length rear arm 940 - 1495 mm
Clear distance between columns min 2560 - 2760 mm
Synchronization system
Column height 4040 mm
Installation width min. 3000 - 3300 mm
Total width min 3000 - 3300 mm
Lifting time 31 sec
Lowering time 28 sec
Clearance height min 4040 - 4909 mm
Drive-through width min 2560 - 2760 mm
Drive-through width column min 2560 - 2760 mm
Drive-through width lifting carriage min 2301 - 2501 mm
Total height min 4040 - 4040 mm
Pick up device
E-Set
Oil quantity (approx.) 13 liter
Electrical connection (Ph/V/Hz) 3 Ph , 400 V , 50 Hz
Engine power 3 KW
Fuse protection
Foundation length 1600 mm
Foundation width 3500 mm
Concrete thickness 200 mm
Concrete quality C20/25
Noise level (<=) 70 db
Customs tariff number 84254100

1
Packaging
Product Dimensions 3000mm x 780mm x 550mm
Total weight 650kg
Stackable 3 times
Customize

Sign up to receive the Nussbaum Newsletter

Subscribe to our mailing list

* indicates required

NUSSBAUM GROUP verwendet die Informationen, die Sie in diesem Formular angeben, um mit Ihnen in Kontakt zu bleiben und um Produktupdates und auf Sie abgestimmtes Marketing bereitzustellen. Bitte lassen Sie uns wissen, was Sie von uns hören möchten:

Sie können Ihre Meinung jederzeit ändern, indem Sie in der Fußzeile einer E-Mail, die Sie von uns erhalten, auf den Link zum Abbestellen klicken oder uns unter [email protected] kontaktieren. Wir werden Ihre Informationen mit Respekt behandeln. Weitere Informationen zu unseren Datenschutzpraktiken finden Sie auf unserer Website. Indem Sie unten auf "Für Liste anmelden" klicken, stimmen Sie zu, dass wir Ihre Informationen in Übereinstimmung mit diesen Bedingungen verarbeiten dürfen.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.

© Otto Nußbaum GmbH & Co. KG - Alle Rechte vorbehalten.