SMART LIFT 2.35 SL OTTO MM

The electromechanical 2-column lift SMART LIFT 2.35 SL OTTO MM with spindle, a load capacity of 3500 kg and OTTO MM support arms is the only lift in the world with a triple safety system. The SMART LIFT 2.35 SL OTTO MM is the ideal lift for continuous daily use in a constantly busy car workshop for which only the best is good enough. With its low minimum height and flexible installation width, it fits into any car workshop. The simple cable connection between the columns can either be installed in the floor or via a simple, height-adjustable cable bridge at the top between the columns.

With the OTTO MM support arms, the perfect combination of the telescopic and double jointed long arms with the two extensions of the short arms, you can lift a wide range of vehicle sizes and weight classes. In addition, the SMART LIFT 2.35 SL OTTO MM is equipped with Mini-Max support discs and therefore allows easy access to the lifting points of lowered vehicles, vehicles with low-slung side skirts or off-road vehicles. Once swivelled in, the support plates can be conveniently lifted to the underbody by foot operation.

The SMART LIFT 2.35 SL OTTO MM is equipped as standard with the patented Nussbaum NT and HyperFlow® technologies and is developed and manufactured by Nussbaum in Germany.

• Lifting time: 46 seconds and lowering time: 40 seconds
• Load capacity: 3500 kg
• OTTO MM support arms reach the mounting points of a wide range of vehicle sizes
• Adjustable in width and height, low minimum space requirement
• Ideal for low ceiling heights with minimum height of only 2892 mm
• Compressed air connection and 220 V socket as standard integrated into the column
• High quality: each unit is individually tested under load before shipment
• CE-Stop included

The Nussbaum SMART LIFT series has proven itself for over 20 years. Today, more than 100,000 SMART LIFT lifts are available worldwide to assist car mechanics in their everyday work.

The spindle carrying nut system consists of a rotating spindle and a low-wear lifting nut made of high-quality Nylatron ®. A second safety nut under the carrying nut additionally secures the system. The arms are secured by an automatic locking device. The lifting nut can be inspected by the user by means of an easily visible optical wear check.

The columns and support arms are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently grau powder-coated. Your lift is thus protected against dirt and weather in the long term.

Scope of delivery

Hebebühne mit asymmetrischen Tragarmen davon 2 lange mit Doppelgelenk und eine kurzer doppelt teleskopierbar, MiniMax Aufnahmen, Energie-Set: E-Set (230 V/ Druckluft) in der Bediensäule integriert

Installation requirements

Fundamentstärke 200mm C20/25 normale Bewehrung, 12 Dübel BM12-20/80/40 (abhängig vom Fundament, siehe Prüfbuch), Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Luftanschluss für Energie-Set (option), Entladung