• 0

Uni Lift 5000 NT Plus

Hydraulic scissor lift with wheel-free lift

Uni Lift 5000 NT Plus

Item No:UNI050.12520301D-1-5001-00
Uni Lift 5000 NT Plus
Scissor lift Uni Lift 5000 NT PLUS RAL5001 blue side
Scissor lift Uni Lift 5000 NT PLUS RAL5001 blue front
Customize Compare
Brief description
Item No: UNI050.12520301D-1-5001-00
Lifting capacity: 5000 kg
Type Scissor lift
Color Blue

Uni Lift 5000 NT Plus

The hot-dip galvanized hydraulic scissor lift UNI LIFT 5000 NT Plus with a load capacity of 5000 kg is the perfect lift for acceptance, diagnosis, tyre service and repairs in the automotive workshop. With its fast lifting and lowering times, its small footprint thanks to the low rails and short ramps, its comfortable lifting height of 1920 mm, its flexible installation width and the integrated hydraulic wheel-free lift (RFH), the UNI LIFT 5000 NT Plus is the perfect equipment for garages that need a lifting platform that meets all the requirements of modern service operations.

The wheel-free jack allows free access to the vehicle's wheels in no time at all. By simply changing a switch on the control column, the operator can switch between the lift of the wheel-free lift and the lift as a whole.

The UNI LIFT 5000 NT Plus can be easily retrofitted with the JAX 2000, JAX 2600 or JAX 3200 axle jacks adapting to the development of your workshop for a long time to come.

  • Lifting time: 35 Seconds / lowering time29 Seconds
  • Capacity: 5000 kg
  • Lifting height of 1920 mm
  • Fast lifting wheel free lift (RFH) for all work on tyres and wheels
  • Space-saving: Low rails and short drive-on ramps
  • Flexible installation width, Distance between control unit and lift can be varied as required
  • Retrofittable with axle lifts
  • Two redundant hydraulic circuits with NT technology
  • 360° access
  • Can also be installed flush with the floor: Uni Lift NT
  • Developed and manufactured in Germany

All Nussbaum hydraulic scissor lifts are equipped with two redundant hydraulic circuits as standard: Nussbaum-s patented hydraulic technology NT. The control unit of the UNI LIFT 5000 NT Plus is equipped with a main switch and protected pushbuttons and can be positioned at various distances from the lift. The UNI LIFT 5000 NT Plus has no fixed connections between the platforms and can therefore be installed in different installation widths as required. Would you like to install your scissor lift flush with the floor? Click here to go to the inground version: Uni Lift NT

The low power consumption and low maintenance requirements, also thanks to the reduced number of moving parts, reduce running costs. The scissors and platforms are welded in Nussbaum's own state-of-the-art welding machines, shot-peened and then powder-coated azul Your lift is thus protected against dirt and weather in the long term.

Capacity 5000 kg
Load capacity wheel-free lift 3500 kg
Installation type above ground
RAL color RAL 5001 - Blue
Coating Powder coating
Platform length min 5200 mm
Recommended installation width 2220 mm
Platform length wheel-free lift max 1945 - 1465 mm
Wheel free lift 1
Wheel-free lift stroke 580 mm
Lifting height max. 1920 mm
Synchronization system
Lighting (type)
Lighting (number)
Platform width 635 mm
Platform height 195 mm
Platform distence min 750 - 1050 mm
Drive on height 195 mm
Installation width min. 2020 - 2320 mm
Total width min 2020 - 2320 mm
Lifting time 35 sec
Lowering time 29 sec
Total platform width 2220 mm
Motor power per column 3 KW
Pick up device
Oil quantity (approx.) 15 liter
Electrical connection (Ph/V/Hz) 3 Ph , 400 V , 50 Hz
Fuse protection
Foundation length 5350 mm
Foundation width 2300 mm
Concrete thickness 180 mm
Concrete quality C20/25
Noise level (<=) 75 db
Customs tariff number 84254100


Data sheet 77 KB

Foundation plans

U foundation plan 87 KB

Inspection books

Ersatzteilliste UNI LIFT 5000 NT 04/08 837 KB


Uni Lift NT Broschüre - Deutsch 1.9 MB
Uni Lift NT Brochure - English 1.9 MB
Uni Lift NT Panfleto - Español 1.9 MB
Uni Lift NT Brochure - Francais 1.9 MB
Uni Lift NT Prospetto - Italiano 1.9 MB
Product Dimensions 5250mm x 770mm x 500mm
Total weight 1390kg
Stackable 2 times
Product Dimensions 5250mm x 770mm x 500mm
Total weight 1390kg
Stackable 2 times
Product Dimensions 1350mm x 500mm x 500mm
Total weight 100kg
Stackable nicht Stapelbar

Sign up to receive the Nussbaum Newsletter

Subscribe to our mailing list

* indicates required

NUSSBAUM GROUP verwendet die Informationen, die Sie in diesem Formular angeben, um mit Ihnen in Kontakt zu bleiben und um Produktupdates und auf Sie abgestimmtes Marketing bereitzustellen. Bitte lassen Sie uns wissen, was Sie von uns hören möchten:

Sie können Ihre Meinung jederzeit ändern, indem Sie in der Fußzeile einer E-Mail, die Sie von uns erhalten, auf den Link zum Abbestellen klicken oder uns unter [email protected] kontaktieren. Wir werden Ihre Informationen mit Respekt behandeln. Weitere Informationen zu unseren Datenschutzpraktiken finden Sie auf unserer Website. Indem Sie unten auf "Für Liste anmelden" klicken, stimmen Sie zu, dass wir Ihre Informationen in Übereinstimmung mit diesen Bedingungen verarbeiten dürfen.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.

© Nussbaum Automotive Lifts GmbH - Alle Rechte vorbehalten.